This is topic Location of Officer’s Lounge in TMP in forum Starships & Technology at Flare Sci-Fi Forums.


To visit this topic, use this URL:
https://flare.solareclipse.net/ultimatebb.php/topic/6/1481.html

Posted by Commander Dan (Member # 558) on :
 
While watching ST: TMP DE on DVD, I was reading Okuda’s text commentary and became somewhat confused when Okuda stated, “the lounge is theoretically located on the back rim of the saucer, near the recreation deck.”

Certainly, the lounge “windows” (if in fact, they are windows) could really only be some of the “rectangular” windows on the rear of the primary hull, starboard aft. All 8 of those rectangular windows, (4 on deck six, and 4 on deck seven) however, are pretty much “accounted for” in terms of sets seen throughout the movie.

When the crew is assembled on the recreation deck, we can see the top row of 4 windows behind several individuals standing on the balcony. Certainly, there is no officer’s lounge here. And later, we get a pretty view of the area just below that as Decker is showing the “Ilia Probe” around the rec-deck.

So, is Okuda clueless as to where it should be located, or is he simply presenting information that was given to him by those who produced TMP?

(On a side note, I can’t help but point out that Okuda has seemed “clueless” in the past in regards to the refit Enterprise design. He was either unaware or did not care that Andrew Probert has designated the refit Enterprise as an Enterprise class vessel.

Additionally, when looking at Okuda’s “deck chart” for the Enterprise-A in the first printing of the Star Trek Encyclopedia, he erroneously locates Main Engineering on deck 19, and also locates deuterium fuel storage on decks 16 & 17.

He also lists the E-A as having 23 decks, which is purely inaccurate. It is simply not possible to account for that many decks based on horizontal window locations present on the filming model.

Certainly, the sets in TMP were specifically and systematically designed to be “located” in certain areas of the ship. Details on the sets, as well as details on the exterior of the filming model, reinforce this.)

O.K., enough Okuda bashing for now.

So, just where IS the officer’s lounge? At this point, I would have to guess that those “windows” are actually viewscreens, just as Shane Johnson illustrated in his book, “Mr. Scott’s Guide to the Enterprise.” He shows this section of the officer’s lounge to be a separate room, located just forward of the lounge area glimpsed as Spock’s shuttle is docking. However, any additional suggestions as to just where the officer’s lounge is located are certainly welcome.

Of, course, we have seen in subsequent Trek that there seems to be problem with building sets where the windows actually correspond to the exterior of the filming model. Cases in point: The Forward Observation Lounge in ST V: TFF; and the officer’s dining hall in ST VI: TUC (granted, this is just a redress of the TNG briefing room, but still, where is THIS supposed to be on the E-A?).

[ December 01, 2001: Message edited by: Commander Dan ]


 
Posted by The Mighty Monkey of Mim (Member # 646) on :
 
The lounge *IS* on the back rim of the saucer, on the starboard side. (Looking forward.) The windows on the set were made to correspond to those on the model.

The RecDeck is just below the bulge of the bridge. Those four large windows are the RecDeck.

The window views that have been added in the DE (The nacelle for the lounge, and the V'ger chamber for the RecDeck) correspond to both of these locations.

And as far as I know, the refit-Connie does indeed have 23 decks. (Disregarding, of course, the 78-deck-upside-down turboshaft in STV. )

-MMoM

[ December 01, 2001: Message edited by: The Mighty Monkey of Mim ]


 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by The Mighty Monkey of Mim:
The lounge *IS* on the back rim of the saucer, on the starboard side. (Looking forward.) The windows on the set were made to correspond to those on the model.

The RecDeck is just below the bulge of the bridge. Those four large windows are the RecDeck.
-MMoM

[ December 01, 2001: Message edited by: The Mighty Monkey of Mim ]


Sorry, Mim, but that's incorrect. I spoke to Andy Probert two days before Thanksgiving and he himself complained that the officer's lounge seen in the film is still using the Rec Deck windows. What happened was after they built the Rec Deck they decided to use parts of it to build the officer's lounge, because it would be cheaper than building the set that had been designed.

The Rec deck IS, in fact, that big bank of eight rectangular windows just starboard of the impulse engines. In fact, and though it's almost impossible to see because of the people in the Rec Deck, there was a large painted backing outside the windows portraying the spacedock "roof" and one nacelle, verifying its location. You can see a bit of it if you look really closely.

The REAL officer's lounge are the windows just below and aft of the bridge. It's those windows through which we see Spock's shuttle arriving. That set was a miniature. Andy's suggestion during the production of the film was to rip the window wall out of the set they did use, shoot a bluescreen there, and matte in the miniature. But it was never done.

Andy also claims that the angle the nacelle is seen from in the officer's lounge would put the room 3 feet too low (and the lounge seen in the shuttle docking is much too high as well).
 


Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by Commander Dan:
While watching ST: TMP DE on DVD, I was reading Okuda’s text...

Additionally, when looking at Okuda’s “deck chart” for the Enterprise-A in the first printing of the Star Trek Encyclopedia, he erroneously locates Main Engineering on deck 19, and also locates deuterium fuel storage on decks 16 & 17.

He also lists the E-A as having 23 decks, which is purely inaccurate. It is simply not possible to account for that many decks based on horizontal window locations present on the filming model.

[ December 01, 2001: Message edited by: Commander Dan ]


I think we have to be careful about refering to the 1701 refit as the 1701-A. The latter is a different ship, which we all know has 78 decks according to ST5.

Andy Probert gave me some photocopies of drawings he did for TMP. I have scanned a cutaway showing all the decks in the engineering hull and dorsal. I will upload it if someone can remind me how/where.

According to this drawing, there are 4 decks in the dorsal (one above the separation line, one below). There's a gap about .6 decks high at the level of the photorp exhaust vent, then there's one deck through the torpedo launcher. There are 7 decks indictated from there down, the bottommost one being the botanical deck. There is space for one small deck below, but no indications that one exists.

So....if the deck at the bottom the impulse engine is deck 7, adding the 12 decks indicated abot makes for 19 deck. If we assume one final deck at the bottom (where I assume all the antimatter is stored), that's a grand total of 20 decks. It should be pointed out that Andy's drawing clearly shows all the portholes and lines the decks up with these.

So, based on this...

Deck 12: Torpedo bay
Deck 14: Main Engineering/Hangar cotnrol room
Deck 16: Docking port/hanger deck floor
Deck 17: Floor of hanger airlock/elevator/shuttle storage
Deck 18: Floor of cargo deck/overmost shuttle storage
Deck 19: Botantical garden

Finally, looking at Mr. Scott's Guide to the Enterprise, Shane Johnson's cutaway is almost accurate (he clearly based it on Andy's drawing), but where he messed up with whe got one too many decks in the dorsal (I suspect he mistinterpreteted that short .6 deck height non-deck at the impulse exhaust for a full deck). Otherwise, hes got everything else pretty much right (except the stuff he made up, of course).

[ December 01, 2001: Message edited by: mrneutron ]


 
Posted by The Mighty Monkey of Mim (Member # 646) on :
 
Well, I was talking about what's onscreen. I think it's obvious that there was little attention paid to Probert's cutaways and such. When they went to do the DE, they put a virtual camera inside a virtual model of the Ent and that's the view from which they added the CCI window views. And they used the back-saucer-rim windows for the Officer's Lounge, and the large aft-bulge windows for the recdeck. That may have been an error, but it's canon.

And anyways, I think most people (including me) have always assumed the aft-saucer rim to be the location of the OL, due to the fact that any fool can see that the windows correspond exactly to those on the model in that area. It's just common sense, guys...

-MMoM

[ December 01, 2001: Message edited by: The Mighty Monkey of Mim ]


 
Posted by Commander Dan (Member # 558) on :
 
Mrneutron,

Shane Johnson’s “Mister Scott’s Guide to the Enterprise” indicates that there is, in fact, an additional deck above the torpedo bay and below the 4th set of windows on the dorsal. His book also illustrates the Enterprise as having one additional deck being located below the botanical gardens, for a grand total of 21 decks. Johnson certainly did his homework when he put the book together, and even consulted Andrew Probert, so if he says the refit Enterprise has 21 decks, that is good enough for me. 21 decks can, after all, be reasonable fit into the existing horizontal window placement on the filming model.

Additionally, this would correspond to a scene in TUC where Scotty runs into the torpedo bay to check inventory and he passes a sign that says Deck 13. (In all fairness however, it is also TUC that establishes the refit Enterprise as a Constitution class vessel, with which I total disagree!)

Mighty Monkey of Mim,

With all due respect and no ill will, I believe that MOST people who have studied the refit Enterprise to any degree would agree that rec-deck is located at the back edge of the saucer, starboard aft. All EIGHT of those windows clearly correspond to the 8 windows on the filming model, whereas only a COUPLE of those rectangular windows are seen in the officer’s lounge. “It’s just common sense…”

Besides, various publications that have been printed over several years illustrate the location of the rec-deck quite well and quite accurately.

[ December 01, 2001: Message edited by: Commander Dan ]


 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by The Mighty Monkey of Mim:

Well, I was talking about what's onscreen.

So am I. The nacelle outside the Rec Deck windows is on screen. You just have to look very hard to see it. Freeze the video at 29:25 and 29:31 and you can see them Not easy to see, but unmistakebly there, seen through eight rectangular windows that conform exactly to the outside of the ship.

quote:
It's obvious that there was little attention paid to Probert's cutaways and such.

On what do you base this assertion? The officer's lounge is the only blatant mistake they made. Everything else is right on the money.

quote:
When they went to do the DE, they put a virtual camera inside a virtual model of the Ent and that's the view from which they added the CCI window views.

Actually, it IS wrong. I just looked at the profile of the ship. The bottom bulge of the engine should be lined up just about perfectly with the window, but the window is clearly lower. I think they mistestimated the window height in the CG model very so slightly. Then there's the matter of the starfield going backwards at an angle that makes the ship appear to be "crabbing" through space. Oops!

quote:
And they used...the large aft-bulge windows for the recdeck.

The prosecution points to the shots shots of Decker and Ilia walking across the rec deck and ending up in front of those same rectangular windows seen in the officer's lounge. They in no way correspond to the windows below the bridge.

quote:
And anyways, I think most people (including me) have always assumed the aft-saucer rim to be the location of the OL, due to the fact that any fool can see that the windows correspond exactly to those on the model in that area. I's just common sense, guys...

Everyone I ever chatted with assumed the opposite. Theye was never any reason to assume that location prior to the DE and it's added nacelle.

The case for the Officer's lounge:
Two windows, originally seen with nothing outside them but space (and 21 years later an engine added to the view).

The case for the rec deck:
Eight windows matching exactly exterior of the ship, a nacelle also seen outside. A room clearly too wide to fit into the location below the bridge.

I'll leave it to the jury to decide.

[ December 01, 2001: Message edited by: mrneutron ]


 
Posted by mrneutron (Member # 524) on :
 
Dan,

I agree that Shane Johnson did his homework. I just don't agree that there's room for as many decks as he puts inthe dorsal, based on the window spacing and the deck heights. I'm going to have to call Andy about this deck numbering issue and get his take on it.

I think I may have found the source for this extra deck in the dorsal. There is a red alert diagram created for TMP (it's in the theatrical trailer, but wasn't used in a film until ST2) which shows the various decks of the Enterprise flashing on. If you look at this diagram there are 5 decks in the dorsal, not 4. I suspect wherever this came from, that's where the discrepancy crept in. (I also wish it was a little clearer...there is some text that appears along the various decks that I can't make out entirely...ah well!)


Then again there's the announcer who persists in announcing a travel pod at port 6 when it's clearly labeled 5. haha

[ December 01, 2001: Message edited by: mrneutron ]


 
Posted by Commander Dan (Member # 558) on :
 
mrneutron,

Very good then. After studying some of my blueprints and diagrams I am forced to agree that it would make more sense for the torpedo bay to be on “Deck 12,” with no deck “sandwiched” in between Deck 11 and the pho-torp bay.

While I have great respect and high regards for Shane’s book, I do consider Andrew Probert the greater authority, so I would certainly be interested to know his take on the deck count. So, please give us an update if you contact him.

In any case, I think we are in agreement that a 23 deck count is certainly not feasible or realistic.

[ December 01, 2001: Message edited by: Commander Dan ]


 
Posted by mrneutron (Member # 524) on :
 
Dan,

As to the number of decks on the Enterprise refit, below is a drawing Andy Probert did to plan the landing bay/cargo dekc matte shots.

I doctored the image only as follows:


 
Posted by Commander Dan (Member # 558) on :
 
mrneutron,

Very cool! Many thanks! Do you, by chance, have any additional "drawings and notes" by Probert such as this? I would be most insterested to see them!
 


Posted by Malnurtured Snay (Member # 411) on :
 
quote:
He was either unaware or did not care that Andrew Probert has designated the refit Enterprise as an Enterprise class vessel.

Didn't we just go over this? LOL. Whatever the reason, its been pretty firmly established that the refit Constitution is still considered Constitution-Class by TPTB. Therefore, don't bitch at him because of it.
 


Posted by Commander Dan (Member # 558) on :
 
Malnurtured Snay,

I am well aware of what has been established as “cannon” on screen. And, I can accept that this is what is regarded as official to many people. But, people like you must also come to accept that there is a faction of Trek fans out there that will always regard the refit Enterprise as an Enterprise-class vessel.

Granted, Okuda’s designation made it to film, while Probert’s did not, but putting that aside, who would you give more credence; the individual who designed the refit Enterprise and worked on TMP production team, or some guy that comes along several years later that had nothing to do with TMP or the Enterprise’s re-design?

Admittedly, it has always aggravated me how the Enterprise-class designation was just ignored by Okuda and others, despite Andrew Probert’s designation, Gene Roddenberry’s approval (as documented in the 1980 Wallaby Blueprints), and over 10 years of fandom and various publications that accepted this as designation “cannon.”


--------------------


“My experience with Rick Berman is, you know, he does not understand what he's doing, he does not understand science fiction.”
-- Andrew Probert
 


Posted by Malnurtured Snay (Member # 411) on :
 
Dan,

Yes, I do understand that, and I'm fine with it ...

... but, correct me if I'm wrong, you're upset that Okuda labeled the Enterprise as a Constitution-Class in the TMP E commentary, right? So, uh, since its pretty much been acknowledged that the refit is the "Constitution" class (essentially ever since "The Battle" which would've used the movie Ent model if they hadn't decided to go with a new class and re-dub), what's the beef?
 


Posted by Spike (Member # 322) on :
 
quote:
Granted, Okuda�s designation made it to film, while Probert�s did not

Well, that's not exactly the truth.

http://home.arcor.de/spike730/misc/enterpriseclass.jpg
http://home.arcor.de/spike730/misc/enterpriseclass2.jpg
 


Posted by mrneutron (Member # 524) on :
 
More about the number of decks on the refit Enterprise...

Her's the RED ALERT diagram I memtioned before that has five decks in the dorsal:
http://home.pacbell.net/mauricem/red_alert_decks.gif

Turbolift w/Kirk:
http://home.pacbell.net/mauricem/turboshafts1.jpg

Turbolift display sans Admiral and toupee:
http://home.pacbell.net/mauricem/turboshafts2.gif

This is the turboshaft diagram that appears in the lifts in the film. It's very tough to make out how many tubes are in this, because of the clutter of what I believe to be labeling. I wish someone somewhere had gotten a behind the scenes still of this thing.

Fun stuff.
 


Posted by mrneutron (Member # 524) on :
 
Referring back to the topic that started this all, here's the on-screen proof of where the Rec Deck is.

High Angle
Low Angle

I knocked everything but what's outside the ports to grayscale and did some edge enhancement and color boosting to make it clearer, but you can see the drydock and the pylon and the nacelle outside the windows.

Now, the other big mystery is how the Rec Deck fits vertically into the saucer, as it may be two decks high at the windows, but it's clearly too tall to fit in the saucer farther in (look at that ceiling and the height of the side walls!).

Oy!

[ December 02, 2001: Message edited by: mrneutron ]


 
Posted by Commander Dan (Member # 558) on :
 
Spike,

You are absolutely, positively, without a doubt, my new hero!

I never knew that the Enterprise-class designation had ever made it to film in any form. Now, I have evidence that it was used in TWOK, well before TUC.

So then, which designation from which film supercedes the other?

I suppose the “Constitution-classers” will argue that because Scotty’s schematic was more clearly seen in TUC, that takes precedence.

I will still stick to my guns regarding the Enterprise-class designation. However, since I believe in being fair and objective, I should mention that TWOK did make at least one signage blunder. In one scene where the crew is preparing for the battle with Khan, A sign can be seen that says "Torp Bay 4." And how many torpedo tubes does the Enterprise have?


Mrneutron

Many, many thanks for all of the “goodies!”


----------------------------------------------------


“My experience with Rick Berman is, you know, he does not understand what he's doing, he does not understand science fiction.”
-- Andrew Probert

[ December 02, 2001: Message edited by: Commander Dan ]


 
Posted by Spike (Member # 322) on :
 
quote:
So then, which designation from which film supercedes the other?

I'd say that the Enterprise class is a sub-class of the Constitution class. So, both films would be correct.
 


Posted by The Mighty Monkey of Mim (Member # 646) on :
 
Dan and mrneutron, I see now that I have been in error and apologize for being thick-headed.

But,
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
Let's not get started again on the Constitution/Enterprise class thing.

I beseech you, kind Sirs, for I have no strength to go on!

-MMoM
 


Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by Commander Dan:
Spike,
I suppose the “Constitution-classers” will argue that because Scotty’s schematic was more clearly seen in TUC, that takes precedence.

I will still stick to my guns regarding the Enterprise-class designation.[ December 02, 2001: Message edited by: Commander Dan ]


Well, again, the ship seein in ST1-ST3 is one vessel, that seen in ST4-6 is a whole 'nother matter. The latter ship is very different (the corridors and everything), so maybe it's the "new model year" Constitution with the same body styling as the refit "Enterprise" classes (how Detroit), but wholly different guts.

Or maybe the refits were called Enterprise class until Kirk stole the ship, and Starfleet decided to go back to the original designation for PR reasons.

[ December 02, 2001: Message edited by: mrneutron ]


 
Posted by Commander Dan (Member # 558) on :
 
quote:
Originally posted by mrneutron:
Or maybe the refits were called Enterprise class until Kirk stole the ship, and Starfleet decided to go back to the original designation for PR reasons.

LOL!


--------------------------------------


“My experience with Rick Berman is, you know, he does not understand what he's doing, he does not understand science fiction.”
-- Andrew Probert

[ December 02, 2001: Message edited by: Commander Dan ]


 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by Commander Dan:
[QBMrneutron

Many, many thanks for all of the “goodies!”
[/QB]



One more goodie for ya...that possibly clarifies a matter of debate around Yellow Alert in ST2...

http://home.pacbell.net/mauricem/intruder_alert.gif


 


Posted by Reverend (Member # 335) on :
 
I had never even thought about this graphic before.
I like many others just assumed it was showing the low level defence fields energising.

I take it the DE has not restored this graphic. (I don't own a copy coz I'm in the UK)
While I'm at it, does anyone know when the Region-2 release will be?
 


Posted by Shik (Member # 343) on :
 
OR...you can call it Enterprise-class & we can call it Constitution & we can agree that officially it's the latter, but you prefer the former for YOUR universe & yours along & won't push it on us as we won't push it on you & all is well & happy.
 
Posted by Commander Dan (Member # 558) on :
 
quote:
Originally posted by Shik:
OR...you can call it Enterprise-class & we can call it Constitution & we can agree that officially it's the latter, but you prefer the former for YOUR universe & yours along & won't push it on us as we won't push it on you & all is well & happy.

Fine. Except that the “official” (or canonical, if you prefer) designation is now open for debate since Spike has now provided us with some visual evidence that the “Enterprise-class” designation made it on screen (albeit briefly) in TWOK.

Aside from that, I am quite content to agree to disagree.


----------------------------


“My experience with Rick Berman is, you know, he does not understand what he's doing, he does not understand science fiction.”
-- Andrew Probert
 


Posted by Shik (Member # 343) on :
 
By "official," I mean "the Party line." Fuck what's "onscreen."
 
Posted by Commander Dan (Member # 558) on :
 
quote:
Originally posted by Shik:
By "official," I mean "the Party line." Fuck what's "onscreen."

Gee, that was tactful. And who defines “the Party line?”


----------------------------


“My experience with Rick Berman is, you know, he does not understand what he's doing, he does not understand science fiction.”
-- Andrew Probert
 


Posted by The Mighty Monkey of Mim (Member # 646) on :
 
Just like to point out that Chekov's screen in TSFS also reads "Constitution-class"...

[**ducks head and runs**]

-MMoM
 


Posted by Spike (Member # 322) on :
 
quote:
Just like to point out that Chekov's screen in TSFS also reads "Constitution-class"...

But the ship on this screen was the NCC-1700 and in TOS configuration IIRC.
 


Posted by The Mighty Monkey of Mim (Member # 646) on :
 
True, but it was obviously supposed to represent the ship, as Chekov was pionting out stuff on it. (Well he was pointing stuff out on a more detailed deck plan, and then they went to a shot of that screen with a little bleeping light on it, showing where the diturbance was. [Spock's quarters.])

-MMoM
 


Posted by Spike (Member # 322) on :
 
Well, and in TNG they used an Ambassador top view to represent the Excelsior class vessel Potemkin.
 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by The Mighty Monkey of Mim:
True, but it was obviously supposed to represent the ship, as Chekov was pionting out stuff on it.

Now this is weird, because they could very easily have used the INTRUDER ALERT display I mentioned earlier, which shows the correct ship design AND even has a flashing indicator on the Officers Quarters Deck.

Just shows how little attention some people pay, I suppose!
 


Posted by mrneutron (Member # 524) on :
 
I was just looking at the cutaway of the 1701 refit I posted the other day and it occurred to me what I would have made of that thing commonly referred to as the "photon torpedo exhaust vent". If that feature had never been labeled I would have assigned it the function of engineering hull impulse engine. It's in a good spot to be that. Ah well, they didn't ask me when they were making TMP.
 
Posted by Commander Dan (Member # 558) on :
 
quote:
Originally posted by The Mighty Monkey of Mim:
Just like to point out that Chekov's screen in TSFS also reads "Constitution-class"...

O.K., Actually, that is pretty good evidence that the refit-Enterprise is still a Constitution class ship.

In the 80s, it was certainly undisputed by most (if not all) fans that the refit Enterprise was an Enterprise-class vessel. In order to “explain” oddities such as the one you mentioned, we would often rationalize that while the ship had been refit and updated, perhaps not all of the “databanks” had been brought up to current specs.

Of course, that explanation is pretty weak, and I can certainly see how it might be more reasonable to presume the refit-E is still a Constitution-class vessel, as that is certainly reinforced by TUC.

To be honest with you guys, after the publishing of Okuda’s Encyclopedia, as well as the release of TUC, I (reluctantly) began referring to the new Enterprise as a “Constitution-refit.” I was not happy about it, but I decided that I could probably accept it. In fact, Starstation Aurora published a set of “Comparison charts” in the 80s that listed the refit Enterprise as the following: Enterprise-class (Constitution II) Keeping this in mind, I came to use the “Constitution-refit” designation when referring to refit-E.

However, I am most excited about the new “evidence” from the TWOK that establishes the “Enterprise-class” as being somewhat canonical. So needless to say, I am inclined to discard the “Constitution-refit” designation and revert back to “Enterprise-class.” I am, after all, an “old school Trekkie!”
 


Posted by TSN (Member # 31) on :
 
Of course, it's still the simulator that's labelled "Enterprise" class, not the ship.

"But, people like you must also come to accept that there is a faction of Trek fans out there that will always regard the refit Enterprise as an Enterprise-class vessel."

There's also a faction that regards thew Defiant as Valiant-class, but we ignore them, too. :-)

One other note... On that drawing back on the first page, there's that orange space bewteen decks 11 and 12. I'm thinking that's just part of deck 12. The line at the bottom of it needn't be a deck line. It's just the top of the "box" at the base of the neck. Part of deck 12 could extend up into the neck, to contain torpedo machinery, and such.
 


Posted by Timo (Member # 245) on :
 
Agreed with TSN on the torp deck thing. It would be more satisfying to have that "interdeck" be deck 12, the torp deck lower level be deck 13 (thus jibing with TUC), and the ship thus have 21 SJ'esque decks.

This has been an enlightening little thread indeed. I never even realized that one could see the windows (and out of the windows!) in the Rec Deck interior scenes - my copies of TMP have been so crappy thus far.

One solution to the Officers' Lounge problem could be that it's actually on the port side of the saucer aft rim. It's not a perfect solution, but the errors there (the viewing angle on the pylon, the shape and size of the window, and the fact that the impulse engine assembly aft tip doesn't protrude into the view) are IMHO minor compared with the problematique of trying to fit the room to the starboard side.

As we know, the saucer has these infamous double rows of windows on the rim, clustered so that they don't really make sense as the windows of two separate decks. There are some horizontally elongated windows in each cluster. The windows on the Officer's Lounge could correspond to these.

Similarly, one of the forward clusters of windows could house the steering wheel -decorated lounge from ST5. Given the crappy quality of the starstreak effects in that movie, it's not at all said that the lounge would have to be on ship centerline or anything. Deck floor level on the rim of the saucer might fall between the F and G decks if need be.

Timo Saloniemi
 


Posted by Woodside Kid (Member # 699) on :
 
quote:
Of course, it's still the simulator that's labelled "Enterprise" class,
not the ship.

I wouldn't put too much stock in that as an argument against it being the ship's class designation. I spent six years in the Air Force doing simulator maintenance, and we referred to them by the type of aircraft, i.e. KC-135, SR-71, etc. Moreover, when the cockpit design differed between specific models, we referred to them in that way (B-52G vs. B-52H model).

As for the argument that the sign referred to the class being trained (i.e. the students assigned to the Enterprise), that never made any sense to me. You don't rename a simulator when a new class of flight students begins, any more than you rename your high school every year after the seniors graduate.
 


Posted by Timo (Member # 245) on :
 
But it's not a big deal to "rename" the simulator, if we assume it had no name in the first place. It's just Mark IV Bridge Simulator, that's it's name. And every time a new class comes in, a new name is displayed under the name of the simulator. Today, it's the Enterprise class visiting the simulator, and it's thus configured for that specific ship. Tomorrow, the guys will swap the helm console and move the wall sections a bit, and voila, the Farragut class can come in and train on a rather good facsimile of their ship's bridge.

It *is* more or less standard practice to have the schedule of a classroom written on the door or next to it. Granted, this day's schedule seemed to be lacking the hours, but if the Enterprise class was going to spend the whole day in there...

And while the schedule *could* be in the form of crude, handwritten notes, there's no reason why it couldn't look like a semipermanent aluminum plackard as well. Heck, at my old high school the art class schedules were color prints of famous artworks.

Timo Saloniemi
 


Posted by Spike (Member # 322) on :
 
But if another class is scheduled for the simulator, they'll have to remove the whole label. The part with "Mark IV simulator" as well.

Wouldn't it be more logical to have one label with "Mark IV simulator" and one separate label for the class?

[ December 03, 2001: Message edited by: Spike ]


 
Posted by Sol System (Member # 30) on :
 
There's something to be said for the fact that this particular simulator was quite specifically simulating the experience of commanding the Enterprise, and not just any Constitution.

Consider that the Enterprise was being slowly eased into retirement at the time, with a nice quiet life of training cadets ahead of it. It does not seem unreasonable to believe that the simulator was designed and programmed to replicate the Enterprise itself, and not just any Constitution.

When Kirk yanked her out of retirement (and then blew her up) Starfleet would have to find a new training ship, and, perhaps, rebuild (and relabel) their simulator. Republic Class, perhaps?
 


Posted by The Mighty Monkey of Mim (Member # 646) on :
 
Well, you know, it could very easily refer to the fact that this was the CLASS OF TRAINEES that was to be aboard the Enterprise.

-MMoM
 


Posted by Commander Dan (Member # 558) on :
 
Here is Shane Johnson’s interpretation of the location of the Officer’s Lounge as published in “Mr. Scott’s Guide to the Enterprise.” Because of the problem that STILL exists (even after the director’s edition DVD) of placing this lounge at an area where the windows would actually correspond to the exterior of the model, I am still inclined to accept this as the lounge’s location.

After all, the officer’s lounge is SUPPOSED to be in this area, and I think the placement and “viewscreen” concept is the best compromise. (Viewing screens are also about the only explanation that can be made for the forward observation lounge in Star Trek V.)

[ December 03, 2001: Message edited by: Commander Dan ]


 
Posted by Phelps (Member # 713) on :
 
I'm surprised nobody mentioned this -- Probert's online sketches:

http://members.tripod.com/~DesignR/TrekTMP1.html

It doesn't help solve the problem, of course, but at least it shows clearly the original intention.
 


Posted by Commander Dan (Member # 558) on :
 
Actually, it was "mentioned."

quote:
Originally posted by Commander Dan:
…located just forward of the lounge area glimpsed as Spock's shuttle is docking.


quote:
Originally posted by mrneutron:

The REAL officer's lounge are the windows just below and aft of the bridge. It's those windows through which we see Spock's shuttle arriving. That set was a miniature.

[ December 03, 2001: Message edited by: Commander Dan ]


 
Posted by Phelps (Member # 713) on :
 
I meant the actual site, being an easy reference. Then again, I guess we've all seen these.
 
Posted by AndrewR (Member # 44) on :
 
Ignore STV... It was all a dream sequence.

The schematic above works for the dining room as seen in Trek6 - not at the back where the big windows are, but where that 'room' curves around either side! Bung in a table - and you've got it!
 


Posted by Dax (Member # 191) on :
 
Finally got my copy of The Director's Edition yesterday.

I'm not sure if anyone has already suggested this but I would place the officer's lounge adjacent to the recreation deck. Looking at pics of the ship miniature there is a single small window to each side of the 4 rec-deck windows on Deck 6. I reckon the lounge would be behind one of those two windows.
 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by Dax:
Finally got my copy of The Director's Edition yesterday.

I'm not sure if anyone has already suggested this but I would place the officer's lounge adjacent to the recreation deck. Looking at pics of the ship miniature there is a single small window to each side of the 4 rec-deck windows on Deck 6. I reckon the lounge would be behind one of those two windows.



The trouble is, the lounge has two windows, both the same size/shape as the rec-deck's. The windows you refer to are round as I recall.
 
Posted by Dax (Member # 191) on :
 
*checks DVD*
Damn! You're absolutely right, mrneutron. It's funny but I never noticed that second window before. Well I did, but I somehow assumed it was a mirror or something - but it's clearly not.
*sigh*
 
Posted by AndrewR (Member # 44) on :
 
Why didn't they just make the Lounge the room infront of the 'wooden room' that we see when Spock's shuttle docks? Just matte it in behind them!?! They could probably matte some actors sitting around too!
 
Posted by mrneutron (Member # 524) on :
 
quote:
Originally posted by AndrewR:
Why didn't they just make the Lounge the room infront of the 'wooden room' that we see when Spock's shuttle docks? Just matte it in behind them!?! They could probably matte some actors sitting around too!


Well...that was Andy Probert's idea when he saw the set they built, and some of his drawings reflect that, but no one wanted to go there.
 
Posted by AndrewR (Member # 44) on :
 
And no one thought of simply taking a screen grab of the wooden-lounge in the 'Spock Arrives' scene and matting on the blue screen of the filmed 'lounge' scene for the DVD!?! Why go to all the trouble of the nacelles etc. (or so I belive is there - I haven't scene it yet).

Andrew
 


© 1999-2024 Charles Capps

Powered by UBB.classic™ 6.7.3